TG 80 Start

TG 80 Start

Product description

TG 80 Start is a water-based primer to be used before applying HB 80 Finish. Ensures good adhesion. Use: Concrete tiles and Fibre cement. Not usable on clay tiles and natural slate.


Standard colours: Black, anthracite grey, anthracite grey dark, slate grey, oxide red, bordeaux, tile red, red brown, mocca*, black blue, forest green.*slight colour differences may occur. Other colours are available on demand

Application details The temperature must be between 8° C and 30° C and relative humidity <85 % RH.

Application method

Brush, roller or airless, nozzles 19 – 21, 180 - 220 bar. Apply the primer in one procedure. Always make a test coat to ensure the compatibility of product and surface.

Technical data

Gloss NA

Spreading rate 6 - 7 m²/l

Drying time The drying time for wet layer thickness 200 µm 20° C / 65 % RH: Touchdry after ~1 hour. Recoatable after ~2 hours. Fully cured after ~24 hours. The drying time and time for recoating depend on layer thickness, temperature, relative air humidity, and air circulation.

Pretreatment/cleaning The roof must be cleaned thoroughly using high-pressure and Iso A-Clean. The surface must be clean, dry and durable.

Environment Avoid spillage into drains, water systems and soil. Destroy liquid waste according to the local regulations. Recycle or dispose of empty, dry cans in accordance with local regulations. VOC: Max. 40 g/l (Kat. A/c)


Water-based. Ensures good adhesion.

This product is available in the following standard colours:

Please note that the colours below are digital colours and, therefore, are intended as a guide only. If you are in doubt about a colour, we advise you to make a test coat of the colour concerned.

* Only gloss 20, ** Only gloss 50

Black (20)


Anthracite grey (22)


Anthracite grey dark (23)


Slate grey (25)


Oxide red (28)


Bordeaux (30)


Tile red (34)


Red brown (36)


Mocca (38)


Black blue (42)


Forest green (46)