Isonit 12-20-50

Isonit 12-20-50

Product description

Isonit is a water dilutable roof coating with a high covering strength and a short drying time. The coating is breathable (diffusion-open) and creates a water-repellent surface. High covering strength and good adhesion abilities. Good flow and levelling properties. Strong and water-repellent surface. Light-fast and weather-stable. CE-marked (EN1504/2). Isonit is used for concrete roof tiles, fibre cement and fibre cement slates (primed with Eternit Primer), primed steel roofs. Not usable on clay tiles and natural slate.

Colours

Standard colours: Black, anthracite grey, anthracite grey dark, light grey, slate grey, tile red R-728, oxide red, bordeaux, Swedish red*, tile red, red brown, mocca, dark brown, black blue, royal blue**, forest green. *only gloss 20, **only gloss 20 and 50. Other colours are available on demand.

Application details

The temperature must be between 8° C and 30° C and relative humidity <85 % RH.

Application method

Brush, roller or airless, nozzles 19 – 21, 180 - 220 bar. To ensure the optimum layer thickness, we recommend to apply the paint in two layers. Always make a test coat to ensure the compatibility of product and surface. It is recommended to maintain coated roofs with a treatment with Iso A-Clean every second year – in order to keep the surface nice and clean.

Technical data

Gloss 12, 20, 50

Spreading rate 2 - 3 m²/l

Drying time The drying time for wet layer thickness 200 µm 20° C / 65 % RH: Touchdry after ~1 hour. Recoatable after ~2 hours. Fully cured after ~24 hours. The drying time and time for recoating depend on layer thickness, temperature, relative air humidity, and air circulation.

Pretreatment/cleaning The roof must be cleaned thoroughly using high-pressure and Iso A-Clean. It is advantageous to prime fibre cement roofs with Eternit Primer in order to obtain a durable surface (see TDS). The surface must be clean, dry and durable.

Environment Avoid spillage into drains, water systems and soil. Destroy liquid waste according to the local regulations. Recycle or dispose of empty, dry cans in accordance with local regulations. VOC: Max. 40 g/l (Kat. A/c)

Properties

Water-based. High covering strength and good adhesion abilities. Good flow and levelling properties. Strong and water-repellent surface. Light-fast and weather-stable. CE-marked (EN1504/2).

This product is available in the following standard colours:

Please note that the colours below are digital colours and, therefore, are intended as a guide only. If you are in doubt about a colour, we advise you to make a test coat of the colour concerned.

* Only gloss 20, ** Only gloss 20 and 50

Black (20)

 

Anthracite grey (22)

 

Anthracite grey dark (23)

 

Light grey (24)

 

Slate grey (25)

 

Tile red R728 (26)

 

Oxide red (28)

 

Bordeaux (30)

 

Swedish red (32)*

 

Tile red (34)

 

Red brown (36)

 

Mocca (38)

 

Dark brown (40)

 

Black blue (42)

 

Royal blue (44)**

 

Forest green (46)