Spreading rate 3 - 3,5 m²/l
Drying time The drying time for wet layer thickness 150 µm 20° C / 65 % RH: Touchdry after ~1 hour. Recoatable after ~2 hours. Fully cured after ~24 hours. The drying time and time for recoating depend on layer thickness, temperature, relative air humidity, and air circulation.
Pretreatment/cleaning The roof must be cleaned thoroughly using high-pressure and Iso A-Clean. Always prime with TG Start to ensure good adhesion. The surface must be clean, dry and durable. If the surface of TG Start is not sufficiently dry, the full gloss effect will not be obtained.
Environment Avoid spillage into drains, water systems and soil. Destroy liquid waste according to the local regulations. Recycle or dispose of empty, dry cans in accordance with local regulations. VOC: Max. 40 g/l (Kat. A/c)
Water-based. Full glossy surface. Good adhesion abilities. Strong and water-repellent surface. Light-fast and weather-stable.
This product is available in the following standard colours:
Please note that the colours below are digital colours and, therefore, are intended as a guide only. If you are in doubt about a colour, we advise you to make a test coat of the colour concerned.